G Pen Hydout 510 Battery – Red Translucent

The Hydout 510 is compatible with most standard 510-thread cartridges, including those up to 2g in size. It works with both ceramic and metal-tipped carts designed for oil concentrates.

No, a 510 cartridge is not included. The Hydout 510 is a battery device only and must be paired with a separate 510-thread cartridge.

Press the power button 5 times quickly to turn the Hydout on or off.

Press the power button 3 times to cycle through the 5 voltage levels:
2.4V, 2.8V, 3.2V, 3.6V, and 3.8V, displayed on the digital LED screen.

Preheat Mode warms your cartridge at 1.8V for 10 seconds to help unclog thick oils and prepare it for use. To activate, press the power button twice quickly.

Use a USB-C charging cable (not included). Plug into the port on the bottom of the device. The battery icon on the LED screen will indicate charging progress.

The 400mAh battery offers multiple sessions per charge, depending on your voltage setting and usage. At lower voltages, it can last all day with moderate use.

Yes. The Hydout supports USB-C pass-through charging, so you can use it while it is plugged in.

Make sure the device is turned on
Ensure the cartridge is fully screwed into the battery
Try using Preheat Mode to unclog thick oil
Check that the battery is charged
Try a different cartridge to rule out a defective one

Yes, the Hydout 510 comes with a 90 day limited warranty.

To clean your Hydout 510:
Remove the cartridge and ensure the device is powered off.
Use a cotton swab lightly dampened with isopropyl alcohol (IPA) to gently clean the interior threads and contact points.
Wipe the magnetic mouthpiece cover and outer surfaces with a soft cloth and IPA if needed.
Allow all parts to dry completely before reassembling or powering on.
Note: Do not submerge the device in liquid or allow moisture to enter the charging port or LED screen area.