G Pen Micro II Vaporizer

The G Pen Micro II is a compact handheld concentrate vaporizer featuring an all-ceramic heating chamber, three heat settings, adjustable airflow, a digital display, haptic feedback, and up to 120 sessions per charge.

The Micro II is designed for use with cannabis concentrates.

The Micro II features three heat settings:
LOW: ~295°F (146°C)
MEDIUM: ~340°F (171°C)
HIGH: ~395°F (202°C)
Actual temperatures may vary approximately ±15–30°F (±8–17°C) depending on heat duration and usage.

With the Micro II powered on, click the button three times to cycle through the heat settings. One cloud represents LOW, two clouds represent MEDIUM, and three clouds represent HIGH.

The Micro II reaches its selected heat setting in approximately 5 seconds. The device will vibrate to let you know when it has reached temperature.

Click the button five times to power the Micro II on or off. The Micro II will also automatically shut off after 10 minutes.

Click the button twice to activate Session Mode. The Micro II will run a 20-second total heating cycle, including approximately 5 seconds of heat-up time. The device will vibrate when temperature has been reached. Click the button twice at any time to cancel the session.

Press and hold the button to activate Manual Heating for more control over your session. Manual Heating can run for up to 25 seconds total, including approximately 5 seconds of heat-up time.

Remove the mouthpiece and make sure the Ceramic Tank is securely attached. Place a small amount of concentrate directly onto the center of the ceramic heating plate, then reattach the mouthpiece before use.

During initial use, concentrate needs to prime the porous ceramic heating plate before optimal vapor production. Additional heat activations and draws may be required, particularly when using the LOW heat setting.

Yes. The airflow control is located on the opposite side of the device from the display. Slide it to the left for increased airflow or to the right for a more restricted draw.

The Micro II features an all-ceramic heating chamber with a 0.8Ω atomizer, designed for consistent concentrate heating and vapor production.

The 1,250mAh rechargeable battery provides up to 120 sessions per charge. Battery life may vary based on heat setting, heating duration, and usage.

The Micro II supports USB-C fast charging and can fully charge in under 60 minutes with a compatible USB-C charging cable and power source.

No. A USB-C charging cable is not included with the G Pen Micro II.

Yes. The Micro II supports pass-through charging, allowing the device to be used while connected to a compatible power source.

The digital display shows the battery status while charging. Once the battery icon on the display is full, the Micro II is fully charged.

The digital display provides at-a-glance information including the selected heat setting, heating status, and remaining battery life.

Yes. The Micro II uses haptic feedback to confirm device actions and vibrates when the selected temperature has been reached.

Power off the device and allow it to cool completely. Remove the mouthpiece and use a cotton swab with a small amount of isopropyl alcohol to gently remove concentrate buildup from the ceramic heating chamber and mouthpiece. Allow all components to dry completely before reassembling and using the device.

No. Do not soak the Ceramic Tank or Battery in isopropyl alcohol. Use a cotton swab lightly dampened with isopropyl alcohol for cleaning instead.

Yes. The separately sold G Pen Micro II Glass Sidecar adds portable water filtration directly to the Micro II. The separately sold 14mm Rig Adapter can also connect the Micro II to compatible glass rigs.

The Glass Sidecar is an optional water-filtration attachment featuring a showerhead percolator and built-in carb. It connects to the Micro II using a silicone adapter to filter and cool vapor for smoother sessions.

Remove the standard mouthpiece and attach the Sidecar silicone adapter. Fill the Sidecar with water to the indicated fill line and connect it to the adapter. Position the Sidecar mouthpiece in the same direction as the Micro II button and display. Cover the carb while drawing, then release it to clear the glass.

The optional Rig Adapter features a 14mm male glass connection that allows the Micro II to connect to compatible 14mm female glass rigs for water-filtered and cooled sessions.

No. The Glass Sidecar and 14mm Rig Adapter are sold separately.

Yes. Replacement Micro II Ceramic Tanks are sold separately, in the Micro II collection.

The Micro II measures approximately 98.6 × 24 × 32 mm and weighs 86g, making it compact and easy to take on the go.

No. The G Pen Micro II is not compatible with Micro+ parts or accessories. Only use parts and accessories specifically designed for the G Pen Micro II.

The heat source on the Micro II tank comes only from the bottom porous ceramic heating plate. On any first activation, the porous ceramic heating plate will first need to prime before vapor production can be achieved. This might take multiple activations, especially on lower heat settings. Also make sure any residual concentrate material from the side walls is moved to the center of the heating plate in order to fully vaporize remaining concentrate material.