How do I use the Micro+?

Once the Micro+ is loaded and powered on, press the button to begin heating. The Micro+ Battery will vibrate once the tank has heated to the selected temperature, at which point the vapor can be drawn through the mouthpiece. The tank will continue heating as long as the button is pressed, but will automatically stop after 10 seconds. The button can then be pressed again to initiate another round of heating. If you have any further inquiries, please contact our Customer Service Department Monday to Friday, 10 AM to 6 PM ET, at help@gpen.com or +1 833-691-3224.

How do I turn the Micro+ on/off?

The Micro+ can be powered on and off by clicking the button five times in rapid succession.

What does the vibration of the Micro+ indicate?

The Micro+ Battery vibrates for a number of reasons. First, the unit will vibrate when turned on or off. When the Micro+ is being used, the battery will vibrate to indicate that the tank has reached the desired temperature and is ready to be drawn from.

Can the Micro+ be used while charging?

Yes! The Micro+ Battery features pass-through charging, allowing it to be used while plugged into the USB-C charging cable.

Can the Micro+ be used with standard 510 threaded tanks?

Yes! The Micro+ uses Cartridge Recognition Technology to provide optimal power to any 510-compatible cartridge.

How do I activate Session Heat Mode when using the Micro+?

With the Micro+ powered on, click the button twice in rapid succession to activate Session Heat Mode. This will cause the tank to heat continuously at the selected temperature setting for 10 seconds.

How do I change the temperature setting on the Micro+?

The temperature of the Micro+ can be changed by clicking the unit’s button three times in rapid succession. The LED surrounding the button will then light up to indicate which temperature has been selected. BLUE = LOW, GREEN = MEDIUM, RED = HIGH

How do I load the Micro+ Tank?

The Micro+ Tank can either be accessed by unscrewing and removing the full stainless steel housing from the Micro+ Battery, or by simply pulling the silicone mouthpiece off of that housing, exposing the ceramic heater below. The preferred concentrates can then be placed directly onto the Tank’s ceramic plate using the included Micro+ Tool. Once the tank is loaded, replace the housing and/or mouthpiece and proceed to use the Micro+.

How do I know when the Micro+ is fully charged?

When the Micro+ is plugged into the USB-C charging cord, its button will glow red. Once charging is complete, the Micro+ battery will vibrate and the button will turn green.

Why are the lights on the Micro+ flashing different colors when I try to use it?

The light on the Micro+ will flash between green and red if there is any issue in communication between battery and tank attached. This can be resolved by ensuring a clean, secure connection between the battery and tank. The Micro+ battery will also flash red when pressed to indicate it needs to be charged.