What type of cartridges are compatible with the G Pen Hydout 510?

The Hydout 510 is compatible with most standard 510-thread cartridges, including those up to 2g in size. It works with both ceramic and metal-tipped carts designed for oil concentrates.

Does the G Pen Hydout 510 come with a cartridge?

No, a 510 cartridge is not included. The Hydout 510 is a battery device only and must be paired with a separate 510-thread cartridge.

How do I turn the device on and off?

Press the power button 5 times quickly to turn the Hydout on or off.

How do I change the voltage settings?

Press the power button 3 times to cycle through the 5 voltage levels: 2.4V, 2.8V, 3.2V, 3.6V, and 3.8V, displayed on the digital LED screen.

What is Preheat Mode and how do I use it?

Preheat Mode warms your cartridge at 1.8V for 10 seconds to help unclog thick oils and prepare it for use. To activate, press the power button twice quickly.

How do I charge the Hydout 510?

Use a USB-C charging cable (not included). Plug into the port on the bottom of the device. The battery icon on the LED screen will indicate charging progress.

How long does the battery last?

The 400mAh battery offers multiple sessions per charge, depending on your voltage setting and usage. At lower voltages, it can last all day with moderate use.

Can I use the Hydout while it’s charging?

For safety, we recommend waiting until the device is fully charged before use.

My cartridge isn’t producing vapor. What should I do?

Make sure the device is turned on Ensure the cartridge is fully screwed into the battery Try using Preheat Mode to unclog thick oil Check that the battery is charged Try a different cartridge to rule out a defective one

Is there a warranty for the G Pen Hydout 510?

Yes, the Hydout 510 comes with a 90 day limited warranty.

How do I clean my G Pen Hydout 510?

To clean your Hydout 510: Remove the cartridge and ensure the device is powered off. Use a cotton swab lightly dampened with isopropyl alcohol (IPA) to gently clean the interior threads and contact points. Wipe the magnetic mouthpiece cover and outer surfaces with a soft cloth and IPA if needed. Allow all parts to dry completely before reassembling or powering on. Note: Do not submerge the device in liquid or allow moisture to enter the charging port or LED screen area.